$0.00
Shop
Showing 49–64 of 76 results
-
Handmade artisan earrings in sterling silver and jasper
$50.00Lovely cream, rust and olive jasper rectangles suspended from long triangles, hand-textured with tiny circles.
The ear wires are long curving hooks in sterling silver.
Very easy to put on.The stones are 34 x 12mm (1 5/8x ½”)
The total length of the earrings is 45mm (1 ¾”) -
Gisela Kati Jewelry Making Combo Set (Basic Tools, Tutorials and Material’s Kit). FREE SHIPPING.
$219.00This Jewelry Making Combo is designed under the teaching method of “Gisela Kati Art Jewelry Program”. This is an easy to learn method for any person with no previous experience in this field, that want to start in this wonderful world of Handmade Jewelry, and create their own jewelry in a short period of time. It includes all necessary components to start making your jewelry pieces as soon as you open this Combo Set. It comes with tools, materials, and several tutorials that will allow you to create your jewelry.
Additionally it includes the support and mentoring of the artist to help you in your learning process. -
Fused Silver Stud Earrings DIY Tutorial
$9.95Fusing is a technique commonly used while working with fine silver in
the making of woven ring chains and granulation. It can also be a very
useful way to recycle sterling silver scraps.
Fusing requires a good eye and some experience in the use of a
torch.
The main reason for this project is to give you confidence to go on to a
bigger project. After fusing some scrap wire to a couple of small silver
disks, you will have the confidence to fuse a ring or pendant.
This tutorial is an instant downloading PDF file, it has 7 pages, 19 photos, a template and plenty of tips. The tutorial is for beginners and intermediate students. -
Fused Lamination Inlay Pendant DIY PDF Tutorial
$14.95Fusing for lamination inlay is an advanced metal working technique that requires good torch control.
This pendant has one metal fused lamination inlay piece and a rolled milled textured one.
For the fused piece, the substrate is sterling silver and the smaller colored pieces are copper and brass.
The roll milled piece is sterling silver.
For the focal piece, I chose a tab-set lampwork glass cabochon. The pendant was totally assembled with rivets.
The tutorial is an instant downloading PDF file, it has 11 pages, 30 photos, a life size template of all the components and plenty of tips !
For intermediate-advanced skill students. -
Forged and Stamped Component Earrings DIY Tutorial
$9.95Stamping offers an infinite array of options to decorate metal. You can buy or make your own stamps.
This is a simple project that involves shaping, forging and stamping wire to make a keyhole component.
These components are very versatile, they can be combined to make charms, chains and other decorative elements for earrings and bracelets.
This tutorial is an instant downloading PDF file, it has 7 pages, 16 photos, a template and plenty of tips. The tutorial is for beginners and intermediate students. -
Floating Pillow Bead Pendant DIY Tutorial
$9.95Beautiful setting for a pillow bead. It can be strung on a chain as described
in the project. With the addition of a couple of jump rings it
can be worn on a neck wire.
In this project we will use another “cold connection” to attach the pillow
bead to the metal base.
This connecting element is called a “tab”. This type of setting can
work for other bead shapes as well.
The tutorial is an instant downloading PDF file, it has 6 pages, 17 photos, a life size template of all the components and plenty of tips! For beginner skill students. -
Fan Pendant with Interchangeable Bead DIY Tutorial
$14.95Having jewelry that lets you change the focal part of the piece according
to your mood or wardrobe is a very good thing. When you are a
bead maker, you have many options to choose from, and you can create
more as inspiration strikes you.
Need something purple and blue to go with that dress? Make a new
bead and put it on the pendant. You’ll have the perfect complement
for your dress!
This pendant can be made as a stand-alone piece. It can be worn on
a simple neck wire, a Viking knit chain or a rubber/leather necklace.
The tutorial is an instant downloading PDF file, it has 7 pages, 21 photos, a life size template of all the components and plenty of tips! For intermediate to advanced skill students. -
Fan bail, pendant III DIY Tutorial
$9.95Here we have another simple, easy and elegant pendant setting.
It works specially well for long beads, but it can also be used for a set
of 2-3 medium sized beads.
If you want to customize the setting, you can change the shape of the
fan for another one. It can be a triangle, a square or an oval.
The texture on the metal can also be changed to make each pendant
unique.
The tutorial is an instant downloading PDF file, it has 6 pages, 13 photos, a life size template of all the components and plenty of tips!
For beginner skill students. -
Fan Bail, Pendant II DIY Tutorial
$9.95Another very simple, easy no-solder pendant.
This is a project for those not so big beads that came out amazing and
you want to use as focal elements.
The fan shape gives the pendant an oriental feel.
It can be used on a long chain as seen in the photo, or it can be worn
on a neck wire closer to the face.
The tutorial is an instant downloading PDF file, it has 5 pages, 15 photos, a life size template of all the components and plenty of tips! For beginner skill students. -
Etched Cuff with Bead DIY Tutorial
$9.95Etching is a process in which a metal is exposed to a corrosive solution
that eats away the surface of the metal. If a design is made on the
surface of the metal with a material that is impervious to the corroding
action, the design will be in relief over the corroded surface not protected
by the “resist”.
The most commonly used etching chemical for steel, copper and brass
is ferric chloride.
The tutorial is an instant downloading PDF file, it has 6 pages, 14 photos, a life size template of all the components and plenty of tips! For beginner skill students. -
Enamel pendant & copper bail leather cord.
$65.00Handmade Artisan Torch fired enamel pendant in yellow, orange and red.
Enamels are finely ground glass and can be fused to metal by heating the metal and powdered glass until the glass melts, sticking permanently to the metal.
The traditional way of firing enamels to a glassy state is using a kiln, but it can also be done with a torch.
This pendant is fired multiple times, and the “Sgraffito” technique was used to reveal the yellow enamel under the red and orange top coats.
“Sgrafitto” means to scratch in Italian, the design is scratched on the powdered top coat before firing it, to reveal the previously fired coat underneath.The bail rings are made with hand twisted oxidized copper wire.
The enameled piece is 53mm (1 3/8”) in diameter.
The pendant is 64mm (2 ½”) long.It comes on an 8mm black leather cord 46cm ( 18”) long, with a magnetic clasp
-
Enamel pendant & copper bail leather cord
$65.00Handmade Artisan Torch fired enamel pendant in yellow, purple and ruby.
Enamels are finely ground glass and can be fused to metal by heating the metal and powdered glass until the glass melts, sticking permanently to the metal.
The traditional way of firing enamels to a glassy state is using a kiln, but it can also be done with a torch.
This pendant was fired multiple times, and the “sgraffito” technique was used to reveal the yellow enamel under the purple and ruby top coats.
“Sgrafitto” means to scratch in Italian, the design is scratched on the powdered top coat before firing it, to reveal the previously fired coat underneath.The bail rings are made with hand twisted oxidized copper wire.
The enameled piece is 53mm (1 3/8”) in diameter.
The pendant is 64mm (2 ½”) long.It comes on an 8mm braided black leather cord 46cm ( 18”) long, with a magnetic clasp.
-
DIY JEWELRY KIT 3: 6 Silver/Copper components and 1 Digital Tutorial. “Silver and Copper No Solder Large Hoop Earring”. FREE SHIPPING.
$29.95Do It Yourself Handmade Jewelry KIT 1.
Beautiful copper tubing large hoop earrings can be textured and colored in many ways for everyday use.The KIT Includes:
* 6 Pairs of Silver-Copper components to make 6 pairs of earrings.
* 1 Digital TutorialThe Digital Tutorial will be sent by email in a PDF format.
-
DIY JEWELRY KIT 2: 2 pairs of Silver-Silver parts plus 1 Digital Tutorial. “No Solder Dot and Dashes Sterling Silver Earrings “. FREE SHIPPING.
$29.95Do It Yourself Handmade Jewelry KIT 2.
Wonderful introductory project to the art of handmade jewelry.This pair of earrings “No Solder Dots and Dashes Sterling Silver Earrings” will be fabricated completely
out of sterling silver.
Their simple and light contemporary design, make these earrings the go-to pair for everyday use. -
DIY JEWELRY KIT 1: 2 pairs of Silver/Copper components plus 1 Digital Tutorial. “Silver and Copper No Solder Large Hoop Earring”. FREE SHIPPING.
$14.95Do It Yourself Handmade Jewelry KIT 1.
Beautiful copper tubing large hoop earrings can be textured and colored in many ways for everyday use. -
DIY JEWELRY KIT 4: 4 pairs of Silver and 2 pairs of Copper components and 2 Digital Tutorials. No Solder “Dot-Dashes Silver Earrings ” + ” Large Hoop Earrings”. FREE SHIPPING.
$59.95Do It Yourself Handmade Jewelry Combo KIT 4.
These are 2 wonderful introductory projects to the art of handmade jewelry.The first one “No Solder Dots and Dashes Sterling Silver Earrings” will be fabricated completely
out of sterling silver.
Their simple and light contemporary design, make these earrings the go-to pair for everyday use.The second one “Silver and Copper No Solder Large Hoop Earring” is a beautiful copper tubing large hoop earrings that can be textured and colored in many ways for everyday use.
